Select Page

The Scandrea Implant System is one of the lately developed implant system, which is the result of the as excellent engineering work as possible. The premium category Scandrea of BIONIKA system meets the highest expectations.

It is perfectly suitable for the average bone structures, holding the toothworks on the long run. This type covers the 75% of the occurring cases. The raw material of the Scandrea Implant system is homogenically structured, high solidity alloyed titanium.

Connection: Conical-Connection

A fixation is used which eventuates micromotor-free power transmission and offers favorable conditions for the accurate sampling. It superimposes the powers deep right into the implant.

Scandrea 6-sloth conical connection
Every Scandrea implant is available in normal and high contoured supplies.

Cortical Level – The chances of the implant persistency are significantly improved by inserting the upper edge of the implant at the cortical level or below.

Platform switching – The diameter of the abutment is smaller than the outer part of the implant which is connected to the bone. The bone can move to the upper edge of the implant.

Spirally microstriated surface- The microstriated spiral surface can function as a significant weight bearing element. The self-closing thread structure and the cycloid cord thread ensure a micromotor-free condition and fast inserting.

Anatomical tooth root form – Due to the conicity, high thread pitch, high thread deepness, self-closing and self-tapping shaping of the implant screw thread, it has a bone-compacting effect and with due diligence it can be immediately loaded.

Rounded implant end – It helps facilitating the minor direction changes when inserting the implant.

6 diameters can be chosen from.
At least 6 lengths per diameter, except the 7 diameter.

The Scandrea Implant System consists of six different diameter implants, in a wide range of lengths, in order to be an adequate solution for every situations. The structure of every Scandrea implant is homogeneous, made of high solidity alloyed titanium.

Every Scandrea implant is available in a standard contour and „Scandrea+” high contoured supplies.


In all cases of implant abutments, alloyed, high solidity Grade 5 titanium is applied according to the ISO 5832-4 ASTM F136 standard. Different sizes and length abutments in a wide range can be chosen for the BIONIKA implants. There are personalized solutions for every cases. The implant heads can be founded for removable, screwed and glueable toothworks in our supply, as well as implant-level casting heads, temporary heads, healing caps, prosthetic and CAD-CAM elements are available for You at your disposal.

There are more than 40 types of geometries for plastic, zirconium, titanium and cobalt chromium-based toothworks.

Scandrea Implant heads
BIONIKA Scandrea Implant System

Click on the left picture to see the whole catalogue, where every relevant information can be found about the implant system.