BIONIKA single-phase implants
Why choose BIONIKA Implants?
High Quality Materials
Our products are made of the highest quality, highly biocompatible materials.
Advanced technology
Our products are CE marked and the production process is under a strict quality management system.
Large range of sizes
Whether it is diameter or length, BIONIKA offers everything you need.
Long-term guarantee
All BIONIKA products provide a long-term, replacement and money refund guarantee.
Speedy – For flexible and bicortical fixation
The characteristics of the Speedy Implant System: flexible aesthetic head design • Platform switching capability under its flexible neck, equipped with RadialFix grooves • radial thread edge • cycloid thread profile • high thread pitch • high thread depth • conical, self-compressing thread adjusted to the natural tooth root • thin, pointed, conical ending • rotation restraining bit.
Slim – A flexible implant family
Due to its distinctive characteristics, the SLIM Implant System is one of the most suitable solutions, not only for cases of average bone hardness, but in the case of softer bone structures as well. Meeting the requirements of a minimally invasive procedure, the surgery can be performed using only a smaller incision, possibly transgingivally. Thanks to these characteristics, it is the most optimal construction when immediate load-bearing is a requirement.
Slim Flexible Implant System
Available in Aesthetic, Wide, Classic or H4 (4-groove) head design. One of its main features is its bendable neck – up to 20°, with platform switching capability right below it, equipped with RadialFix grooves.
ANCORA – Micro implants for orthodontics
The BIONIKA ANCORA system is specifically designed for orthodontic mini implants. The implants are provided with self-tapping and self-compressional round with three types of heads: • round headed• slit headed • bore headed
Nanoplant – In harmony with nature
Distinctive constructional and applicational characteristics: • Minimal invasive intervention- transgingival surgical technique • OT-CAP micro compatible snap head • Hybrid abutment system • Screw selectional possibility adjusted to the height of the sulcus • Geometry adjusted to the natural tooth root • Self-compressional, self- tapping and self-closing conical thread form •The cycloid cord thread at one-third of the screw exceptionally resists the dynamic power impact, gradually deepening and sharpening • High primer stability- immediate loadness, above 35 Ncm, high primer stability- immediate loadness, above 35 Ncm • Bauer type compatibility
The Nanoplant Implant System consists of two types of single-phase implants:
- MX- For softer maxila bone structure with higher thread pitch
- MD- For harder mandibula bone structure with thin thread edge
BIONIC – Classical blade implant
The first major milestone was in 1992 when BIONIKA firstly got product- ORKI license: for the BIONIC ennosseal blade implant system. This is the first Hungarian titanium dental artificial root implant, which got the 238/92. numbered ORKI-license. The BIONIKA was the first in the Hungarian dentistry field to produce dental implants made with raw titanium.
DENTOSS – For softer bone structures as well
Due to the distinctive characteristics of the DENTOSS Implant System, it is suitable for not only average hard, but in the case of softer bone structures as well. The double paragraphed cycloid thread profile • High thread pitch • High thread deepness • Geometry that is adjusted to the natural tooth root • Radius thread edge • Thin, pointed, conical ending.
MDI Implant System – Minimal invasive intervention
The MDI Implant System may be applied for dentures in the case of harder than average and thin bone structures as well.
Distinctive constructional and applicational characteristics:
• Minimally invasive intervention and transgingival surgical technique possible • Flexible denture connection • High primary stability – able to bear load immediately after being screwed into the jaw bone with a torque wrench • Imtec MDI compatibility
Hybrid Classic – With removable abutments
The characteristics of the Hybrid Classic Implant: It is a Brönemark type hexagonal cross section head with inner cone and screw thread. Micro thread structure with a four paragraphed cortical cord thread. Double paragraphed normal cord thread body part for dynamic force reduction. With increased contour and increased thread depth, the cycloid thread structure with primary stability, self-cutting edge and anti-rotation groove. Each element of the thread has a radius-shaped, continuously variable cross-section.
Hybrid mini – Versatile mini implant
There are more and more patients with a small bone supply, who naturally have the needs of regaining the 100% function of their teeth. BIONIKA has developed the Hybrid mini implant system, which enables them to produce teethworks for versatile usage.
The Hybrid mini implants are applied in the case of average hard and thin bone structure, for removable or screwed toothworks depending on the used abutments.
Hybrid Zygomat – Solution for extended bone deficit
An implant family that ensures versatile solutions. The Hybrid Zygomat provides a solution for extended bone deficit without bone substitution. The irregularly long (we offer 35 to 55 mm length) implants is implanted into the yoke-bone (zygoma).
The application of Zygomat implants offer an immediate solution with a single operation.
Nanotelescope – The flexible tooth fixation
The Nano Telescope Implant System can be used in the case of harder than average and thin bone structures, for removable toothworks.
Distinctive constructional and applicational characteristics:
Minimal invasive intervention • Flexible toothwork connection • In the case of the harder mandibula bone structures the MD implant screws are recommended to use and in the case of the lighter maxilla bone structures the MX implant screws are recommended to use • High primer stability- immediate „loadness”, with a torque above 35 Ncm screwed into the jaw bone • Screw selectional possibility adjusted to the height of the sulcus • Conical, cycloid cord thread • Self-compressional, self-tapping and self-closing conical thread form •Self-cutting thread edges, with anti-rotation function
Slim BG and Microlock systems –
High thread pitch, small thread depth
Microlock, the new system for tooth fixation has an adequate head form, the body part which is implanted into the bone is the same with the Slim BG type, which has a round shaped patent head, the implant is microstriated under the neck part.
Characteristics: • cycloid thread profile • high thread pitch • small thread depth • conical geometry adjusted to the natural tooth root • radius-shaped thread edge • thin, pointed, conical ending • there is a microstriated surface under the neck part
BIOPLANT – single-phase and bicortical systems
The part of the implant which gets to the jaw bone is a dense screw thread with a conical core, its outer contour is cylindrical, and nearly one third of it runs in a conical mantle and ends in a hemisphere. The neck of the soft tissue can be chosen in three sizes depending on the thickness of the gum.
Single-phase Bicortical Implantsystem: The head has hexagonal geometry with an inner screw thread for fixing the abutments.
Single-phase Implantsystem: There are narrow and wide shoulder width types.
Biphasic Implant system: This is a very simple and practical system, which can be implanted with biphasic surgical techniques.
CONEFIT SLIM – The classic bone friend
There are three types of headform implants in the Conefit Slim Implant System: Classic, aesthetic and round-headed.
Distinctive constructional and applicational characteristics:
Conical, self-compressional thread • Cycloid thread profile • High thread pitch • High thread depth • One pic surgical technique • Immediate loadness after the recovery of soft tissue • OT-CAP micro compatible patent head • Geometry adapted to the natural tooth root
