BIONIKA bi-phase implants
High Quality Materials
Our products are made of the highest quality, highly biocompatible materials.
Advanced technology
Our products are CE marked and the production process is under a strict quality management system.
Large range of sizes
Whether it is diameter or length, BIONIKA offers everything you need.
Long-term guarantee
All BIONIKA products provide a long-term, replacement and money refund guarantee.
ACTIVAL – Two-phase implant
Connection of Actival Implant Cone & hex. This complex cone & hexagonal beam geometry, which has already been proven in engineering practice, ensures the most perfect fit. It results in power transmission free of micro-movement and provides favorable conditions for accurate sampling. Nobel Active ® compatibility. A simple solution that has been proven for more than 20 years.
ACTIVAL compatibility: BIONIKA ACTIVAL, ADIN® CloseFit® (ADIN2), Implant Direct® InterActive® (ID), Nobel® ACTIVE® (AC), Nobel® Parallel® CC (NC)
BIOLEVEL – The most widely used connection in the world
The most complete solution that a doctor can offer to his patient.
BIOLEVEL compatibility: Alpha-Bio®, Zimmer®, Biohorizons®, Cortex®, AB®, IQ Implants®, MIS – Seven®, Implant Direct – Legacy®
The need for broadband compatibility between dental implants has arisen during dental and implantology practice. Thus, the BIOLEVEL implant family was developed in 2000, which brought significant progress in practice in relation to implant insertion devices and superstructures.
The applied implant platform connection system provides the doctor with the opportunity to be ready to restore the patient’s ability to chew even in the case of the most extreme bone supply.
BIOSS – Superhero Assists with Soft Bones
Features of the BIOSS Implant System:
- UNIFORM (Compatible) with several systems in terms of implantation instruments.
- UNIFORM (Compatible) with various implant systems, but it is not a replica.
- Functions as an excellent ossifying construct with high primary stability, even in soft bone.
- Manufactured with high precision, ensuring structures are free of micromovements.
BIOPLANT – single-phase and bicortical systems
The part of the implant which gets to the jaw bone is a dense screw thread with a conical core, its outer contour is cylindrical, and nearly one third of it runs in a conical mantle and ends in a hemisphere. The neck of the soft tissue can be chosen in three sizes depending on the thickness of the gum.
Single-phase Bicortical Implantsystem: The head has hexagonal geometry with an inner screw thread for fixing the abutments.
Single-phase Implantsystem: There are narrow and wide shoulder width types.
Biphasic Implant system: This is a very simple and practical system, which can be implanted with biphasic surgical techniques.
BIOPLANT compatibility: Amelo® (AM), OT Medical® (OT), Pitt-Easy® (PE), Symplant® (SY)
BONELIT – Tube in tube
Connection of Bonelit: Pipe in pipe.
It is characterized by four-position rib rotation inhibition and tube-in-tube, conical micro-movement-free fit.
Thanks to the taper of the screw thread of the implant and its high pitch, thread depth, self-closing and self-cutting design, it has a bone compacting effect and can be loaded immediately with due care. The rounded implant end facilitates minor changes in direction when inserting the implant.
CONEFIT – Wide variability
The use of the two-phase Conefit system enables wide variability. For our two-phase implants, abutments for plastic, zirconia, titanium and cobalt chrome-based dentures are available in more than 40 different geometries and in a large selection of sizes.
Contact
The head part is equipped with a hexagonal key hole and a 60-degree centering morse cone that fits stably to the connecting part of the superstructure.
Cortical – Normal, short or extra thin
Tapered connection: Hexacon
Already well-proven in engineering practice, it ensures the most perfect fit. We use a 30-degree cone angle, which results in power transmission free of micro-movements and provides favorable conditions for accurate open or closed spoon sampling, even in the case of larger angle deviations.
BIONIKA Cortical Normal implants offer a wide range of applications for average bone structure. When installing, you must pay attention to both the platform and the nominal diameter. Choosing the correct implant length according to the available bone stock is also important.
Extra short version: marked in blue. Extra thin version: Marked in yellow.
CORTICON – Power transmission without micro-movement
Connection: Conical-Connection-3 slot
We use a fit that results in micro-movement-free power transmission and provides favorable conditions for accurate sampling. It superimposes forces deep inside the implant.
For BIONIKA Corticon implants, you can choose from a large selection of abutments of different sizes and widths. We even have a customized solution for every case!
Our offer includes implant heads for removable, screw-retained and bonded dentures, as well as implant-level casting heads, temporary heads, gingival shaping heads, prosthetic and CAD-CAM elements are available to you in a wide selection.
CORTICON compatibility: Osstem® (OS)
CORTILOG – Normal, one-piece, mini and temporary implants
Cortilog PCL, ECL and CCL belong to the normal, DCL to the one-piece, MCL to the mini, and TCL to the temporary implant. From the absence of a tooth to the replacement of the entire set of teeth, it is the right choice, and we strongly recommend it to you!
CORTILOG compatibility: CONELOG® (CCL), CAMLOG® (CL)
CORTILOG SHORT – Extra short implants compatible with the CamLog® system
The Cortilog Short extra short implant is suitable for tooth replacement even in case of low bone supply. Artificial roots are also available in 6 and 7 mm implant lengths.
On special request, we also undertake the production of 5 mm implants.
The implant connection is a tube-in-tube connection with a Camlog® compatible flat platform. The three cam shapes ensure a precise connection without rotation. We reinforced the outer shell of the implant where the “cams” are located.
DENTUM – The Swedish Bioharmony
Connection: Cone & hex – The perfect cone and hexagonal prism geometry ensures a perfect fixation.
Cortical Level – The chances of the implant persistency are significantly improved by inserting the upper edge of the implant at the cortical level or below.
Platform switching – The diameter of the abutment is smaller than the outer part of the implant which is connected to the bone. The bone can creep onto the upper edge of the implant.
Spirally microstriated cortical surface – The microstriated spiral surface can function as a significant weight bearing element. The self-closing thread structure and the cycloid cord thread geometry ensure a micromotor-free condition for fast insertion.
Anatomical root form – Due to the conicity, high thread pitch, high thread deepness, self-closing and self-tapping shaping of the implant screw thread, it has a bone-compacting effect, it can be immediately loaded with a due diligence.
DENTUM compatibility: Dentium® Superline (DM)
ECO-PLANT – The most attractive customized system for screw-retained dentures
Optimum concept – the economical solution
A minimally invasive solution for fixing full rows of teeth, for great patient satisfaction.
The properties of the Eco Implant System provide an excellent opportunity for the creation of screw-fixed full dentures, with the implantation of only 4 or 6 implants. You can find a more detailed description of the method and additional application possibilities in our Eco catalog.
HICON – A simple solution for average bone structure
Contact: Cone & Hex & Cylinder
The complex cone and hexagonal column + cylinder geometry used in HiCON implants ensures a perfect fit, already well-proven in engineering practice. We use a 25-degree, easy-to-solve cone angle, which results in micro-movement-free power transmission and provides favorable conditions for accurate open or closed spoon sampling. It superimposes forces deep inside the implant. The precise fitting of the cylindrical extension of the head ensures the tilting stability of the head.
HICON compatibility: ICX® Templant (TP)
IMPLIE – IMPLIE Narrow, Standard
This complex cone & hexagonal prism geometry has been proved in the engineering practice and ensures the perfect fitting. We are using a 25-degree cone angle that provides a micro move-free load transmission and assures good conditions for accurate open or closed tray method. It superimposes the forces deep into the implant’s inside.
MEDIS – Five different diameter implants
The Medis implant system includes five implants of different diameters. Each diameter implant is available in at least five different lengths, so you can find the right solution for every situation. All of our Medis implants are made of a high-strength titanium alloy with a homogeneous structure.
Contact: Cone&hex
The complex cone and hexagonal beam geometry ensures a perfect fit. The 90° cone angle results in power transmission without micro-movement. It superimposes forces deep inside the implant.
PRIMER – Flaring, sharp thread
Connection of Primary implants: Cone & hex. The complex cone and hexagonal beam geometry ensures a perfect fit. Platform switching. Thanks to the taper of the screw thread of the implant and its high pitch, thread depth, self-closing and self-cutting design, it has a bone compacting effect. The distal end has a widening, sharp thread.
SCANDREA – The result of the best possible engineering
It is excellently suitable for the long-term retention of dentures in the case of average bone structures. This type can cover 75% of the cases that occur. Its basic material is a high-strength titanium alloy with a homogeneous structure.
Connection: Conical-Connection
We use a fit that results in micro-movement-free power transmission and provides favorable conditions for accurate sampling. It superimposes forces deep inside the implant.
T-REX – Tri-Hex connection with bone crushing effect
• The connection of the T-REX implant is a “Tri-Hex” connection
• Multifunctional connection
• Built-in platform switching
• Bone compaction effect
• “BioTis” surface
• Excellent primary stability even in case of poor bone quality, which is due to the multifunctional thread geometry
• The insertion direction can be changed during the thread for perfect positioning in order to
• Double left spiral bone harvesting channel
• Rounded implant end
